Function Settings - ASCOM 914T Guide Rapide

Replacing the battery
1. Turn off the receiver.
2. Unscrew the screw with a coin and remove the cover.
3. Replace the battery and close the cover. It will take up to 10
seconds before the receiver starts up.
Long messages
The Ascom 914T can receive long messages with a maximum of
10 lines. A message with more than two lines is marked with
The message scrolls automatically, but when it stops, it can be
started again by a short press on the Function button.

Function settings

When the identity is shown in the display, one long press on the
Function button will access the function settings. A short press
on the button scrolls between function settings and a long press
confirms the choice.
Long press
Short press
Short press
One long press confirms the choice.
Sub-menu functions
• Changes the beep signal volume
• Shows the call number
• Enables/disables the 5 extra paging numbers
• Shows time stamp (RTC)
• Reminder beep for unacknowledged pagings
4
Main menu
Off?
Tone?
Menu? long press
Short press
Sub-menu
VOL
Call No.
Extra paging Nos
RTC
Remind
LCD
Program?
Exit?