Product Presentation; Basic Functions - ASCOM 914T Guide Rapide

Product presentation

Ascom 914T is a robust pocket text receiver used in system 900.
The receiver has a two-line display and shows 2 x 12 characters
at the same time. It can receive messages of up to 120 characters
in each message. The receiver has a memory for 10 messages
with altogether 480 characters. Six call numbers can be
programmed and five of them can be enabled/disabled. The
pocket receiver is designed for use in tough environments and
where there is a need for long text presentations.
Functions
Characters per message
Messages stored
Characters in memory
Group paging numbers
Absence indication
Time stamp
Time display
Out of range indication
Vibrator
Note: Your receiver can have functions other than described
here, depending on the pre-programmed parameters.

Basic functions

Turning the receiver ON
One short press on the Function button. The identity is shown in
the display.
Turning the receiver OFF
Two long presses on the Function button.
Scrolling through messages
One short press on the Function button.
Erasing messages
One long press on the Function button until ******** appears.
Accepting a message
One short press on the Function button,
120
10
480
5
Yes
Yes
Yes
Yes
option
stops flashing.
GB
3