Tipone ® Repeat Dispenser Tips; Ml And 50 Ml Tipone ® Repeat Dispenser Tips - Star Lab RepeatOne Mode D'emploi

2.1. TipOne Repeat Dispenser Tips
®
The minimum pipetting volume
filling capacity is stated on each TipOne
2
Dispenser Tips (Fig. 2). The scale facilitates drawing off
partial quantities and helps you to estimate the amount
of liquid still available for operation.
The volume to be pipetted is obtained by multiplying
the set number located on the volume selection dial by
the minimum pipetting volume of the TipOne
Dispenser Tips.
Eg. 1.0 ml TipOne ® Repeat Dispenser Tips, Minimum volume:
1=20 µl at setting 4: 4 x 20 µl = pipetted volume: 80 µl
Better precision is achieved by using a TipOne
Dispenser Tips of small capacity with a high dial setting.
6
· RepeatOne · User Manual
and the maximum
1
Repeat
®
2
® Repeat
1
Repeat
®
Fig. 2
2.2. 25 ml and 50 ml
Number Position
TipOne
of Pipetting of Volume
Steps Selection Dial Dispenser Tips
48 1
Attach the adapter to the
25 ml or 50 ml TipOne
23 2
Repeat Dispenser Tips by
turning it clockwise; re-
15 3
move by turning it counter
clockwise.
11 4
8 5
The correlation between
the position of the volume
selection dial and the
number of pipetting steps
is as shown in the table.
Repeat
®
(Fig.3)
®
Fig. 3