Care And Cleaning; Technical Data - Beper 90.496N Manuel D'instructions

Deep Fryer Use instructions
Do not keep the oil of fat at high temperature for so long, this will make it lose its properties. It is
recommended to change completely oil frequently.
It is recommended not to keep oil into the fryer container for long periods.
Often clean the fryer with absorbing paper.

CARE AND CLEANING

Before cleaning the fryer unplug the cord from the socket an wait until oil is completely cooled to
prevent from burns.
Empty the oil from the non-stick container ; remove residue with a sponge or absorbing paper of
kitchen.
Pour some hot water and wash liquid into the container and let work for 30 minutes ; wash the con-
tainer with spatula used for non-stick surfaces or a soft sponge. Empty the tank and rinse it carefully
with water.
Wash the basket with hot water and wash liquid.
Wash the body and the lid with a soft and wet cloth.
Well dry all the parts.
Do not use abrasive sponge in order to protect the fryer container.
Do never immerge the fryer into water or put it under water flow.

TECHNICAL DATA

Power 840W
Power supply 220-240V ~ 50/60Hz
For any improvement reasons, Beper reserves the right to modify or improve the product
without any notice.
The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE),
requires that old household electrical appliances must not be disposed of in the normal
unsorted municipal waste stream. Old appliances must be collected separately in order to
optimize the recovery and recycling of the materials they contain, and reduce the impact on
human health and the environment. The crossed out "wheeled bin" symbol on the product
reminds you of your obligation, that when you dispose of the appliance, it must be separa-
tely collected.
14