Beurer medical BM 44 Mode D'emploi page 18

Battery life For approx. 600 measurements, de-
pending on blood pressure level or
inflation pressure
Accessories With storage pouch, instruction
manu al, 4 pcs "AA" battery
Protection class Internal power supply, IPXO, no AP or
APG, continuous operation
Explanation of Application part type B
symbols
Caution! Read the Instructions
for Use.
Manufacturer
9. Adapter
Model No. FW 7575M/EU/6/06
Input 100 –240 V, 50 – 60 Hz
Output 6 V DC, 600mA, only in connection
with beurer blood pressure monitor
Supplier Friwo Gerätebau GmbH
Protection This device is double insulated and
protected against short circuit and
overload by a primary thermal fuse.
Make sure to take the batteries out
of the compartment before using the
adapter

double insulated / equipment class 2
Enclosures and
Protective Covers
LR6
• This unit is in line with European Standard EN60601-1-2
and is subject to particular precautions with regard to
electromagnetic compatibility (EMC). Please note that
portable and mobile HF communication systems may in-
terfere with this instrument. For more details, please con-
tact customer service at the address indicated.
• The instrument is in line with the EU Medical Products
Directive 93/42/EC, the German medical products act
and European standards EN1060-1 (non-invasive blood
pressure monitors, Part 1: general require Electromechan-
ical Blood Pressure Measurement Systems).
• If you are using the instrument for commercial or eco-
nomic purposes, you must check measurement precision
regularly in accordance with the "Operators' Ordinance
on Medical Products". Even in the case of private use, we
recommend checking measurement precision every two
years at the manufacturers.
18
Equipment enclosed to protect against
contact with live parts, and with parts
which can become live (finger, pin,
hook test).
The operator shall not contact the pa-
tient and the output plug of AC adap-
tor simultaneously.