Operation - Hatco HEATMAX RHW Série Manuel D'installation

General
WARNING
Read all safety messages in the IMPORTANT SAFETy
INFORMATION section before operating this equipment.
NOTICE
Do not operate unit without food product/water in well.
Damage to unit could occur.
NOTE: For proper heat transfer, operate the RHW series,
(Round Heated Wells), with the special pan supplied.
This pan has a curved bottom to match the shape of
the heating element.
NOTE: Do not operate the unit without a food pan or with an
empty/dry pan. The unit will overheat and go into
FaulT mode.
NOTE: The FaulT indicator will illuminate and the unit will
beep when the unit is overheated or if the temperature
sensor short circuits. When this happens, power is cut
off automatically until the temperature returns to normal
range or the temperature sensor functions normally.
CAUTION
BURN HAzARD: Some exterior surfaces on unit will get
hot. Use caution when touching these areas.
MAX
POWER
Indicator
FAULT
Indicator

OPERATION

ON/OFF
TEMP
(I/O) Button
Button
MODE
Button