DRAMINSKI GMDM Mode D'emploi page 12

In the case of improper sizing of grains quantities
(too little or too much) the message like
too light sample too heavy
or
3. After the dosage tube is placed on the instrument,
press the metal button in the dosage tube and
hold it until the grain from the tube pours into
the measurement compartment. If a message
low battery
appears, further work with the
device is not possible. It is necessary to recharge
the battery.
If all is right the following command will appear:
Rye
press Ok
After pressing OK
TARE
sample
can appear.
Rye
release key
The sample is being weighted now, do not touch
the instrument! (Pay attention if the instrument
and the surface are not subject to shock).
Rye
analysing
After this message the humidity measurement
result will appear as the percentage and
the temperature.
Rye
14,8% 22°C
EN
11