Connecting To A Bodypack Transmitter - MicroMic C518 M Mode D'emploi

2 Interfacing
2.3.2 Connecting
to a Bodypack
Transmitter
Note:
Attaching the
Bodypack Trans-
mitter to the Mi-
crophone:
Fig. 2: Inserting the
transmitter into the
adapter.
Refer to fig. 2.
16
• Use the supplied connecting cable to connect
the output socket on the gooseneck to the in-
put socket on the bodypack transmitter.
• You can attach the bodypack transmitter to
your belt or to the instrument. The PT 40 and
PT 400 bodypack transmitters will also mount
directly on the microphone (see below).
1
1. Pull the ends of the fixing clip (1) out of the
adapter.
2. Slide the transmitter (2) all the way into the
adapter.
3. Reinsert the ends of the fixing clip (1) into the
openings in the adapter. The ends of the fixing
clip engage the locating holes in the transmit-
ter case to hold the transmitter in place.
2 3
AKG C 518 M / C 518 ML