Weight Only; Body Analysis - Carmen CBS0301P Mode D'emploi

TIP: To reset a memory position for another user perform the same steps as described above. All positions are preset.

Weight only

The scale has a step-on function. Step barefoot onto the scale. Stand still with your weight distributed evenly on both legs.
The scale will start measuring your weight immediately and a short time later will display your weight. When you step off the
scale it will turn off after a few seconds.

Body analysis

When you stay barefoot on the scale after it displayed your weight, the scale will automatically perform a body analysis. The
scale can identify users according to the weight.
Important: When using the analysis function, make sure there is no contact between your feet, legs, calves or thighs.
Otherwise the measurement will not be performed correctly.
After the weight is stable, the "0" signal moves from left to right for two times, and then shows the data.
The scale is measuring the bodyfat, -water, etc.
The scale can identify a person by their weight. If it detects more users with a similar weight, it will display the relative user
positions. Use the or keys to choose the right user. Stay on the scale to complete the measurement.
The scale will now display the results: Bodyfat, bodywater, BMI, muscle, bone mass, calories and weight.
To give you the opportunity to see all the results, the scale will show them two times before it turns off.
It will also display the user information again for confirmation and then switch off.
17 • EN