Media Browser (*) - Finlux 22FLD850 Manuel De L'utilisateur

" " or " " buttons, select the desired language
option, and press OK button to activate.
After then, "First time installation" OSD will
appear on the screen. By pressing " " or " "
buttons, select the Country you want to set and
press OK button (* only for EU countries).
After the country option is selected, a message
asking for automatic search appears on the
screen:
Press the OK button to start installation. After
search is completed for digital channels, a
message asking whether to search for analogue
channels appears on the screen:
Press the OK button to search for analogue
channels. The following menu appears on the
screen for analogue channel search:
Select your Country , Language and TXT
Language by using " " or " " and " " or " "
buttons. Press OK or RED button to continue. To
cancel, press BLUE button. The following menu
will be displayed during the automatic tuning:
After APS is fi nalized, the programme table
will appear on the screen. In the programme
table you will see the programme numbers and
names assigned to the programmes.
If you do not accept the locations and/or the
programme names, you can change them via
the program table.

Media Browser (*)

(*) It is possible that this function is not included in
your TV.
•• To display Media Browser window, press
either " M " button on the remote control and
then select Media Browser by pressing " "
or " " button. Press OK button to continue.
Media Browser menu contents (depending
on the contents of your USB drive) will be
displayed.
• Also, when you plug a USB device, the
following screen will be displayed:
Select YES by pressing " " or " " button
and press OK button. Media browser will be
displayed.
Note: Movie Sense feature cannot be set while in
Media Browser mode.
• You can play the MP3, video (*) and JPG fi les
from a USB memory stick.
Note : If you plug USB stick while in analogue mode,
the TV will automatically switch to digital TV mode.
Note : Some USB compliant devices may not be
supported.
Note : If the USB stick is not recognized after power
off/on or First Time Installation, fi rst, plug the USB
device out and power off/on the TV set. Plug the USB
device in again.
English - 35 -