Setup; Free-Standing Freezyboy ® One; Freezyboy ® One In A Drawer Pull-Out - FreezyBoy One Black Mode D'emploi

4 Setup

The appliance must be set up in line with the following instructions.
FreezyBoy is designed for indoor use. Do not put it outdoors.
®
For safety reasons, ensure that the air inlet vent is always at least 5 cm away
from the nearest surface. Never cover the air vents.
FreezyBoy must always be standing on its own feet or on the raiser when
®
it is running.
4.1 Free-standing FreezyBoy
Keep the appliance out of direct sunlight.
Setup instructions
1. Place FreezyBoy
2. Place FreezyBoy
The following additional parts are not required:
Raiser
Cable clamp
Support bracket
Mounting plate
Screw set
4.2 FreezyBoy One in a drawer pull-out
®
Base unit width: at least 30 cm
Drawer pull-out with nominal length of at least 45 cm
Power connection 220-240 V
FreezyBoy ® can be combined with a waste bin
in a drawer pull-out. Depending on the height of the
waste bin, FreezyBoy
without the raiser.
One
®
® on a flat, level surface.
on a flat, level surface.
®
can be installed with or
®
45