Other Cautions; Specifications - Korg RADIAS Manuel D'utilisation

2
With the accessory shelf oriented vertically, place
the hinge into the groove.
1 2
3
Fold the accessory shelf down.
Do not place object heavier than 5 kg (11 lbs) on
the accessory shelf.
Remove the accessory shelf before transporting
the instrument.

Other cautions

After assembly, please observe the following cautionary
notes.
• Keep the screws tightened
After assembly, the screws may loosen over time, so we
recommend that you periodically check to make sure
that they are tight. If you notice that the unit feels wob-
bly, it may be that the screws have started to loosen.
Please re-tighten them.
• About keyboard stands
Do not use a stand that supports the RADIAS only from
the middle. Also, don't place the unit in an unstable lo-
cation, or lean it against a wall.
• Transportation
3
If you need to transport the system after assembling it,
you must fold down the RADIAS-R and lock it to the
RD-KB. You must also remove the accessory shelf.
• Disassembly
If you need to disassemble the RADIAS-R, reverse the
steps in the Assembly section. Keep the screws and oth-
er parts in a safe place so that you don't lose them.
Specifications
Keyboard
49 full size, velocity-sensing keys (no aftertouch)
Controllers
Modulation wheel, Pitch Bend wheel
Controller connector
TO RADIAS-R connector
Dimensions (W × D × H)
885 mm × 383 mm × 98 mm (34.84" × 15.09" × 3.86")
Weight
6.0 kg (13.23lbs)
Included items
connection cable, accessory shelf, handle, double-sided
tape
Other cautions
7