Functional Description - Makita LC01 Manuel D'instruction

FUNCTIONAL
DESCRIPTION
CAUTION:
Always be sure that the tool is switched
•
off and the battery cartridge is removed
before adjusting or checking function on
the tool.
Installing or removing battery
cartridge
2
010014
Always switch off the tool before
•
insertion or removal of the battery
cartridge.
To remove
•
withdraw it from the tool while pressing
the buttons on both sides of the
cartridge.
To insert the battery cartridge, hold it so
•
that the battery cartridge front shape fits
to that of the battery installment opening
and slip it into place. Always insert it all
the way until it locks in place with a little
click. If not, it may accidentally fall out of
the tool, causing injury to you or
someone around you.
Do not use force when inserting the
•
battery cartridge. If the cartridge does
not slide in easily, it is not being inserted
correctly.
1. Battery cartridge
1
2. Button
the battery cartridge,
Switch action
1
010063
CAUTION:
Before inserting the battery cartridge
•
into the tool, always check to see that
the switch trigger actuates properly and
returns to the "OFF" position when
released.
To start the tool, simply pull the switch trigger.
Release the switch trigger to stop.
ASSEMBLY
CAUTION:
Always be sure that the tool is switched
•
off and the battery cartridge is removed
before carrying out any work on the
tool.
Disposing of Dust
CAUTION:
Empty the cleaner before it becomes
•
too full, or the suction force weakens.
Be sure to empty out the dust inside the
•
cleaner itself. Failure to do so may
cause the filter to be clogged or the
motor to be damaged.
2
010022
In order to drop dust sticking on the filter in
the capsule, tap the capsule 4 or 5 times
with your hand.
5
1. Switch trigger
1. Capsule
2. Suction inlet
1