Off/On Timer Operation - Daikin Siesta ATXP20M5V1B Mode D'emploi

INFORMATION
▪ Powerful and Econo operation CANNOT be used at the
same time. The last selected function takes priority.
▪ Econo operation reduces power consumption of the
outdoor unit by limiting the rotation speed of the
compressor. If power consumption is already low,
Econo operation will NOT further reduce power
consumption.
To start/stop Econo operation
1 Press to start.
Result: is displayed on the LCD.
2 Press to stop.
Result: disappears from the LCD.
A
c
d
A Running current and power consumption
B Time
a Maximum during normal operation
b Maximum during Econo operation
c Normal operation
d Econo operation
▪ The diagram can be used for illustrative purposes only.
▪ The maximum running current and power consumption of the air
conditioner in Econo operation varies with the connected outdoor
unit.
4.3.7

OFF/ON timer operation

Timer functions are useful for automatically switching the air
conditioner on/off at night or in the morning. You can also use OFF
timer and ON timer in combination.
INFORMATION
Program the timer again in case of:
▪ A breaker has turned the unit off.
▪ A power failure.
▪ After replacing batteries in the user interface.
To start/stop ON timer operation
Use this feature if the unit is NOT operating and you want to start
operation after a certain time.
1 Press .
Result: is displayed on the LCD and the timer lamp
lights up.
2 Press again if you want to change the time setting.
INFORMATION
Each time is pressed, the time setting advances by
1 hour. The timer can be set between 1 to 12 hours.
Example: If is set when the unit is NOT operating,
operation will start after 2 hours.
3 To cancel the setting, press .
ATXP20~35M5V1B
R32 split series
3P520336-7B – 2018.12
a
b
B
Result: and the time setting disappear from the LCD and the
timer lamp goes off.
To start/stop OFF timer operation
Use this feature if the unit is operating and you want to stop
operation after a certain time.
1 Press .
Result: is displayed on the LCD and the timer lamp
lights up.
2 Press again if you want to change the time setting.
INFORMATION
Each time is pressed, the time setting advances by
1 hour. The timer can be set between 1 to 12 hours.
Example: If is set when the unit is operating, operation
will stop after 5 hours.
3 To cancel the setting, press .
Result: and the time setting disappear from the LCD and the
timer lamp goes off.
INFORMATION
Night set mode
When the OFF timer is set, the air conditioner
automatically adjusts the temperature setting (0.5°C up in
cooling, 2.0°C down in heating) to prevent excessive
cooling/heating and
temperature.
To combine OFF timer and ON timer
1 To set the timers, refer to "To start/stop OFF timer operation" on
page 7 and "To start/stop ON timer operation" on
Result: and are displayed on the LCD.
Example:
2 If
Result: Operation stops in 1 hour and then starts 7 hours
later.
3 If
operating.
Result: Operation starts in 2 hours and then stops 3 hours
later.
4 Operation
ensure a comfortable sleeping
page 7.
is set when the unit is operating.
is set when the unit is NOT
Operation manual
7