Lcd Feedback Messages - Neato Robotics Botvac Connected Mode D'emploi

LCD Feedback Messages

LCD Feedback Messages
Your vacuum is smart and will let you know when it needs help with anything. Just read
the messages on the LCD to understand what it needs. Here are some specific tips.
LCD Message
Dirt Bin Full
Brush Stuck
Bumper Stuck
Time Not Set
44
Remedy
Empty dirt bin and replace into its slot.
Remove brush guard and clean all hair and
debris from brush and brush shaft. Replace
brush and guard and press START button
to resume cleaning.
Jiggle the bumper to loosen.
If your battery runs very low, the Neato
Vacuum loses its clock setting. Use the
menus to reset the time and day as
described in Setting the Clock on page 28.
Neato Vacuum User's Guide