Red Bull Racing SMR 19 Mode D'emploi page 61

You can trim your eyebrows to 3 mm or 6 mm with the
comb attachment (4) provided.
1. Remove the protective cap (5) from the miniature blade (1).
2. The comb attachment (4) is labelled with 3 mm on
one side and 6 mm on the other. Place the comb
attachment (4) on the miniature blade (1) from above.
Make sure that you have placed the side of the comb
attachment (4) that you want to use for trimming (3 or
6 mm) on the miniature blade (1). Ensure that you hear
and feel the comb attachment (4) click into place.
3. Slide the ON/OFF switch
device.
4. Run the comb attachment (4) over your eyebrow from
the outside of the brow inwards towards your nose.
5. When you are finished with the application, slide the
ON/OFF switch
6. Pull the comb attachment (4) up and off.
7. Place the protective cap (5) on the miniature blade (1).
(2) up to switch on the
(2) down to switch off the device.
61