Targus DEFCON CL Manuel De L'utilisateur page 10

Targus Notebook Security DEFCON
cabinet. If you plan to use the two screws, you can use
the base plate as a template to pre-drill the holes.
2 Use the abrasive pad, then the alcohol wipe to
prepare the area when you will attach the DEFCON
Security Base Plate.
3 After the alcohol dries, remove the backing on the
base plate to expose the adhesive and place it on the
prepared location. If desired, secure the base with the
two screws.
NOTE: W
HEN USING THE ADHESIVE BACKING
-60°F (16°C),
RECOMMEND TO USE IN OUTDOOR OR HIGH HUMIDITY ENVIRONMENT
B
ONDING TO GLASS
,
BRASS OR PLASTICIZED VINYL WITHOUT PRIMER SURFACE ARE NOT
RECOMMENDED
AND ALLOW IT TO BOND FOR MORE THAN
,
CERAMIC TILE
. T
ARGUS RECOMMENDS USING BOTH ADHESIVE AND SCREW
10
®
CL Combo Cable Lock
,
APPLY AT ROOM TEMPERATURE
, -
WATER ABSORBENT MATERIALS
24 . N
HOURS OT
.
, ,
COPPER