Mode Of Operation; Maintenance And Environmental Protection; Service Instructions - MeisterCraft MTB 350 C Traduction Du Manuel D'utilisation Original

5452490-Tischbohrm-man 30.01.14 07:52 Seite 45
when activated in the event of danger.
To activate, hit the red Emergency Off
button (12) with the palm of your hand.
To reactivate, turn the Emergency Off
button in the direction of the arrow until
it returns to the starting position.
9 – Mode of operation
The machine may only be operated for a
max. of 15 minutes in continuous
operation. Then allow it to cool down to
room temperature (S2 15 min).
• Fix the workpiece in the desired
position on the drilling table.
• Clamp the accessory required in the
chuck (5).
• Fold the shaving guard down.
• Insert plug in outlet.
10 – Maintenance and
environmental
protection
Switch machine off, pull out plug and
remove chips, dust and dirt with a dry
cloth or a vacuum cleaner. Lubricate
moving parts regularly. Do not allow
lubricants to come into contact with
switch, V-belt and pulley wheels.
Store the machine in a dry place.
Ensure that the machine cannot be
operated accidentally. Protect the
machine to prevent children from
accessing it.
CAUTION! Electrical and battery
operated units that no longer
work should not be disposed of in the
household waste! They are to be
collected separately, in accordance
with the 2012/19 EU directive for the
disposal of electrical and
electronic waste, and
sent for proper and
environmentally-friendly
recycling.
Please discard power tools no longer
usable at a local collection point.
Collection and disposal of packaging
materials separately by types
complying with local rules and
regulations. For details, please
contact your municipal authority
concerned.
11 – Service instructions
• Store the machine, operating
instructions and where necessary the
accessories in the original packaging.
In this way you will always have all
the information and parts ready to
hand.
• MeisterCRAFT devices are to a large
extent maintenancefree, a damp cloth
being sufficient to clean the casing.
Do not drop electrical machines in
water. Please note additional hints
given in the operating instructions.
• MeisterCRAFT devices are subject to
stringent quality control. If however a
functional fault shoult occur, send the
device to our servicing address. The
repairs will be carried out in a short time.
• A brief description of the defect
speeds up the faulttracing and repair
time. If within the guarantee period,
please enclose the guarantee
document and the proof of purchase.
45