LENCO ClassicPhono TCD-2570 Mode D'emploi page 14

Table des Matières

Les langues disponibles

ENCODING FROM A BLUETOOTH SOURCE

Plug an USB Disk into the USB socket. While BLUETOOTH playmode is active, press the RECORD BUTTON (9)

one time, "USB" symbol will show on the display, then press the RECORD BUTTON (9) again to start

recording the Bluetooth sound source. The "USB" symbol will flash and record will start after 5 seconds.

Press the PLAY/PAUSE BUTTON (2) one time to pause the recording (the "USB" symbol will stop flashing).

Press the PLAY/PAUSE BUTTON (2) again to resume recording (the "USB" symbol will flash again).

Press the STOP button to stop recording when you want to finish recording.

NOTE: Be sure to turn the volume of your Bluetooth device to maximum. (If the Bluetooth device's

volume level is 0, nothing will be recorded).

DELETE USB

During USB mode, press DELETE BUTTON (45) one time/"DEL-1" will show on the display. You can

delete the playing track.

Press SKIP UP BUTTON (3). The playing file and "DEL-F" will show on the display. You can delete the

current playing folder.

Press SKIP UP BUTTON (3). "DEL-A" will show on the display. You can delete all of the tracks into the

playing USB.

Finally press DELETE BUTTON (45) again once confirmed to choose "DEL-1", "DEL-F" or "DEL-A".

MUTE/EQ OPERATION

During playing mode, press the MUTE BUTTON (49) one time, the sound will not be heard from the speakers

and "MUTE ON" will show on the display; press the MUTE BUTTON (49) or rotate the VOLUME KNOB (7) to

cancel mute function and the sound can be heard again from the speakers. During playing mode, press the EQ

BUTTON (34) to choose from different sound effect among FLAT/POP/CLASSIC/ROCK/JAZZ.

SPECIFICATIONS

Radio: FM: 87.5 - 108 MHz

DAB: Band III 174 - 240 MHz

Bluetooth: Class II 2400 - 2483.5 MHz

Turntable: N10 ceramic cartridge

speeds 33/45/78 RPM

CD Player: Compatibility CD/CD-R/CD-RW/MP3

USB socket: play/record on USB stick (MP3) (not for charging)

USB recording bitrate: mp3 format 128KBPS

Power consumption: 40W (max)

Music output power: 2 X 4.5W (RMS)

Table des Matières