Automatic Tuning; Manual Tuning - LENCO ClassicPhono TCD-2570 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

FM RADIO OPERATION
ANTENNA
For FM and DAB reception, there is a wired antenna jack (28) on the back of the unit. The FM/DAB wire antenna
is packed in a plastic bag together with the user manual. Plug the antenna wire into the jack. Extend the
antenna cable and move around to get the best signal reception
Operation
1.
Switch ON the POWER ON/OFF BUTTON (15). The Display (18) will light up.
2.
Press sequentially the FUNCTION BUTTON (6) to select the FM radio manual tuning and look for the
desired radio station by turning the TUNING/ENTER KNOB (21).

AUTOMATIC TUNING

1.
During FM working mode, press the MENU BUTTON (19), then turn the TUNING/ENTER KNOB (21) to
select the "SCAN SETTING".
2.
Turn again TUNING/ENTER KNOB (21) and select the option between ALL STATIONS and STRONG
STATIONS ONLY. Press the TUNING/ENTER KNOB (21) to confirm.
3.
Press the SCAN BUTTON (32) and the unit will scan all of the FM stations.
RADIO DATA SYSTEM INFORMATIONS
During FM working mode, press the INFO BUTTON (31) to display the following informations: PROGRAM
TYPE/PROGRAM NO/AUDIO BITRATE/TIME/DATE.
FM & FM-Stereo Reception
• Stereo reception is possible when the tuned FM station is broadcasting in stereo.
• Press the MENU BUTTON (19) until select "'AUDIO SETTING", then press the TUNING/ENTER KNOB (21)
and turn again the TUNING/ENTER KNOB (21) to select between FORCED MONO or STEREO ALLOWED.
DAB OPERATION
1.
Press sequencially the FUNCTION BUTTON (6) to select DAB mode.
2.
Extend the DAB antenna at the back of the unit.
AUTOMATIC TUNING
1.
Press the MENU BUTTON (19), then move the TUNING/ENTER KNOB (21) to select FULL SCAN.
2.
Press the TUNING/ENTER KNOB (21) to start searching the DAB/DAB+ station.

MANUAL TUNING

1.
Press the MENU BUTTON (19), then move the TUNING/ENTER KNOB (21) to select MANUAL TUNE.
2.
Turn the TUNING/ENTER KNOB (21) to tune manually the desired station.
3.
When tuned a DAB stereo station, the "stereo" will show on the LCD.
4.
During DAB reception, press the INFO BUTTON (31) to see the information of the playing DAB station
on the display, i.e Program Type/Program No./Frenquency Range/Signal Strength/Time/Date.
10

Publicité

Table des Matières
loading

Table des Matières