Transportation And Storage; Technical Data - McCulloch B26PS Manuel D'utilisation

• Always allow the product to cool down before
storage.
• For storage and transportation of the product and
fuel, make sure that there are no leaks or fumes.
Sparks or open flames, for example from electrical
devices or boilers, can start a fire.
• Always use approved containers for storage and
transportation of fuel.
• Empty the fuel before transportation or before long-
term storage. Discard the fuel at an applicable
disposal location.

Technical data

Engine
Cylinder displacement, cm
Cylinder bore, mm
Stroke, mm
Idle speed, rpm
Recommended max speed, rpm
Speed of output shaft, rpm
Maximum engine power acc. to ISO 8893, kW/hp @ rpm
Catalytic converter muffler
Speed-regulated ignition system
Ignition system
Spark plug
Electrode gap, mm
Fuel and lubrication system
Fuel tank capacity, cm
Weight
Without fuel, cutting attachment and guard, kg
1
Noise emissions
1
Noise emissions in the environment measured as sound power (L
2000/14/EC. Reported sound power level for the product has been measured with the original cutting attach-
ment that gives the highest level. The difference between guaranteed and measured sound power is that the
guaranteed sound power also includes dispersion in the measurement result and the variations between dif-
ferent prodducts of the same model according to Directive 2000/14/EC.
18

Transportation and storage

Technical data
3
3
/liter
• Attach the transport guard during transportation and
storage.
• Remove the spark plug cap from the spark plug.
• Attach the product during transportation. Make sure
that it cannot move.
• Clean and do servicing on the product before long-
term storage.
B26PS
26.2
35.8
26
2700-3300
11800
8700
0.75/1.0 @ 8500
Yes
Yes
TORCH CMR7H
0.65
550/0.55
5.4
) in conformity with EC directive
WA
1228 - 001 - 12.07.2019