Working Advice; Maintenance And Servicing - Bosch GTA 560 Professional Notice Originale

10 | English
Securing the power tool (see figures B1–B2)
– Place the saw stand on a firm, flat, horizontal surface. The
height-adjustable foot (5) will help you to straighten the
saw stand.
Undo the wing nut (6) and screw in/out the foot (5) until
the saw stand is level. Retighten the wing nut.
– Centre the power tool on the base frame. Use the stops
(1) to do this.
– Hook the brackets of the two swing latches (2) over the
housing frame (8) and fold down the levers of the swing
latches to secure the power tool.
Operation

Working Advice

Do not overload the saw stand. Always observe the max-
imum load bearing capacity of the saw stand.
Always hold the workpiece firmly in place, especially long,
heavy pieces. Once the workpiece has been cut, the centre
of gravity may be displaced, causing the saw stand to tip
over.
Transport (see figures C1−C3)
The power tool must not be mounted on the saw stand
u
when the saw stand is being folded up or unfolded.
You can fold up the saw stand for transporting.
– Open the swing latches (2) and remove the power tool.
– Fold up the saw stand.
– Hook the brackets of the two swing latches (2) over the
other side of the housing frame (3) and push down the
levers of the swing latches to secure the power tool.

Maintenance and Servicing

After-sales service and advice on using products
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
1 609 92A 4PC | (22.01.2019)
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch-pt.com.au
www.bosch-pt.co.nz
Republic of South Africa
Customer service
Hotline: (011) 6519600
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: (011) 4939375
Fax: (011) 4930126
E-mail: bsctools@icon.co.za
KZN – BSC Service Centre
Unit E, Almar Centre
143 Crompton Street
Pinetown
Tel.: (031) 7012120
Fax: (031) 7012446
E-mail: bsc.dur@za.bosch.com
Western Cape – BSC Service Centre
Democracy Way, Prosperity Park
Milnerton
Tel.: (021) 5512577
Fax: (021) 5513223
E-mail: bsc@zsd.co.za
Bosch Headquarters
Midrand, Gauteng
Tel.: (011) 6519600
Fax: (011) 6519880
E-mail: rbsa-hq.pts@za.bosch.com
Bosch Power Tools