Setup; Optional Accessories; Technical Specifications - LD Systems STINGER G3 Série Manuel D'utilisation

SETUP

Thanks to the multifunctional cabinet, the subwoofers of the Stinger G3 Series can be placed both horizontally and vertically. Non-slip rub-
ber rails provide stability in both cases. To prevent slippage when stacking the subwoofers, recesses are located on the top for the rubber
rails. An M20 threaded flange when using a speaker extension tube is located on the top side of the cabinet.

OPTIONAL ACCESSORIES

LDESUB15AG3: Protective Cover
Castor Board
LDESUB18AG3: Protective Cover
Castor Board

TECHNICAL SPECIFICATIONS

Model number:
Product type:
Type:
Low/mid driver dimensions:
Low/mid driver dimensions (mm):
Woofer magnet:
Woofer brand:
Woofer voice coil:
Woofer voice coil (mm):
Amplifier:
RMS:
Peak power:
Frequency response:
Max. SPL (peak):
Protection circuits:
Input impedance:
Input sensitivity:
Controls:
Indicators:
Line inputs:
Line input connectors:
Line outputs:
Line output connectors:
Operating voltage:
8
Item No.: LDESUB15G3PC
Item No.: LDESUB15G3CB
Item No.: LDESUB18G3PC
Item No.: LDESUB18G3CB
LDESUB15AG3
PA subwoofer
Active
15"
381 mm
Ferrite
Custom-made
3"
76.5 mm
Class D
450 W
900 W
40 - Low-pass
133 dB
DC, over-current, short circuit, limiter
30 kOhm
0.3 V (RMS)
Main level, mode
On, signal, limit, protect, mode (80 Hz, 100 Hz,
120 Hz, cardioid)
2
6.3 mm jack, XLR
2
XLR
SMPS, 100-120 V AC / 200-240 V AC, 50-60 Hz
(automatic conversion)
LDESUB18AG3
PA subwoofer
Active
18"
457.2 mm
Ferrite
Custom-made
4"
101.6 mm
Class D
800 W
1600 W
35 - Low-pass
135 dB
DC, over-current, short circuit, limiter
30 kOhm
0.3 V (RMS)
Main level, mode
On, signal, limit, protect, mode (80 Hz, 100 Hz,
120 Hz, cardioid)
2
6.3 mm jack, XLR
2
XLR
SMPS, 100-120 V AC / 200-240 V AC, 50-60 Hz
(automatic conversion)