Glow Fire Bio Burner 24 Guide D'utilisation page 5

- The fireplace must not be used in the immediate vicinity of window coverings, curtains or
other freely hanging materials or fabrics. To ensure that your window coverings cannot touch
the device, keep a minimum distance of 1.5m / 60 ". Take into account that light fabrics
could be blown towards the fireplace by a gust of wind.
The use of "retention loops" for curtains or curtains is strongly recommended.
- Do not touch the chimney during operation.
- The fireplace radiates heat, but cannot be used as the main heating.
- Keep the fuel tank tightly closed.
- Do not use gasoline or fuels other than bioethanol.
- Keep fuel away from children and animals.
- Due to the heat of the fireplace, children and animals should stay away during and 30
minutes after using the fireplace.
- The burning stainless steel chamber and the fuel must not be exposed to direct heat such as
direct sunlight or central heating.
- Do not place flammable materials within 1 meter / 40 inches around the fireplace. The fire-
place should be at least 1 meter / 40 inches away from other objects or furniture made of
flammable material.
- Make sure that the installation site has a fire-proof surface.
- The table or floor on which the fireplace is placed must be able to support its weight.
- It is not recommended to use more than one fireplace in one room at a time.
- We recommend that you have a fire blanket and / or a fire extinguisher nearby
- Do not smoke while working with the fuel.
- Avoid drafts or movements that cause drafts in the room in which the Fireplace is operated.
- The chimney must not be operated in the direct vicinity of an air conditioning or ventilation
system.
- The use of the fireplace is not recommended in rooms with constantly high humidity.
- The fleece in the burner should be changed at least once a year.
- Please remember to fill the bio-ethanol up to 2/3 of each burner.
- When using decorative ceramic wood or stones, it is essential to ensure that no decorative
elements are directly in the flame. The decoration may only be placed around the burner slot
and must consist of non-combustible material.
- When replacing the decoration, make sure that it has cooled down.
Attention: During operation, the decoration material and the pane can reach a temperature of 90 ° - 140 ° C.
With the sliding device it is even up to 200 ° C
5