Table des Matières
Publicité
4
5
6
16
20-40 sec.
approx. 8"
English
When the LED lights continuously, cover the sensor
completely for 20 - 40 seconds.
Remove your hand.
The LED flashes to indicate the sensor mode - once for
maximum mode, twice for reduced range mode.
The LED lights continuously while the sensor
calibrates.
When the LED turns off, the faucet is ready for use.
While the faucet is in reduced range mode, the LED
will flash when the faucet is off. This is normal.
The LED does not flash when the faucet is in maxi-
mum range mode.
Repeat the procedure to return the sensor to reduced
range.
Publicité
Table des Matières
