Preparing The Appliance; Mounting The Handle; Fitting Attachments - Micromaxx MD 15857 Mode D'emploi

6. Preparing the appliance

CAUTION!
Keep plastic packaging out of the reach of children.
There is a risk of suffocation!
 Remove all packaging materials.

6.1. Mounting the handle

 Push the handle rod into the steam cleaner so that the latch fits into the
slot on the housing and audibly clicks into place.
 Push the handle onto the handle rod with the rounded side towards
the rear until the handle lock clicks into place.

6.2. Fitting attachments

You will need the adapter nozzle for all attachments except the floor clean-
er foot. It can be used alone or with the different attachments.
 Push the adapter nozzle into the bottom of the steam cleaner until it clicks au-
dibly into place. Fit the desired attachment onto the adapter nozzle. In the pro-
cess, ensure that the catches on the adapter nozzle fit into the slots on the at-
tachment.
 Fix the attachment by turning it 90 degrees in a clockwise direction.
 Attach the floor cleaner foot without using the adapter nozzle. Ensure that the
adapter of the floor cleaner foot fits exactly into the steam cleaner and audibly
clicks into place.
The following table describes which attachment is suitable for which application:
Attachment
Floor cleaner foot
For cleaning smooth floors
 Before fitting the floor cleaner foot, pull the clean-
ing cloth over the cleaner foot so that the cord
is at the rear and can be pulled over the adapter.
Pull the cord tight with the cord stopper.
Application
DE
FR
NL
DK
EN
105 of 116