Domo DO9079KR Mode D'emploi page 61

www.domo-elektro.be
ASSEMBLY & USE
Balloon whisk/mixer/dough hook
Depending on the nature of the ingredients, the mixing bowl can make 2.3 kg of
dough.
1. Give the unlocking button a quarter turn to unlock the
multifunctional head. Then push the head upwards until
you hear a click.
2. Place the mixing bowl on the base and lock it into
place by turning it clockwise. Put the ingredients into
the bowl.
3. Attach the transparent lid to the head, with the fill
opening at the front. Push the 2 clips on the lid into the
2 grooves in the multifunctional head, so that the lid
stays into place.
4. Attach the accessory you would like to use: balloon
whisk, mixer or dough hook.
A. Slide the accessory with its 2 pins into the 2
grooves in the slot of the head.
B. Push the accessory upwards and give it a
quarter turn counterclockwise.
C. Let go of the accessory so that it falls into the
locking position.
5. Turn the unlocking button back with a quarter turn so
that the multifunctional head moves downwards. Push
the head back into its original position until you hear a
click.
6. Place the appliance on a level, clean and dry surface. Plug in the stand mixer and
select the desired speed by turning the speed control knob from position 1 to 7.
For a quick start and stop you can turn the knob to P - the pulse function. Hold
the knob into the P position to mix and let go of the knob to stop mixing.
7. During preparation you can add ingredients through the fill opening in the lid.
You can close off the fill opening with the seperate lid.
8. To switch off the stand mixer, turn the speed control knob to position 0.
DISASSEMBLY
1. Remove the plug from the socket.
2. Give the unlocking button a quarter turn to unlock the multifunctional head. Then
push the head upwards until you hear a click.
3. Push the accessory upwards, out of the locking position and give it a quarter turn
clockwise. Slide the accessory out of the slot and remove it from the head. Be
61
DO9079KR
3
4
A