Bertazzoni REF18WCPIXL Notice D'installation page 20

6. INSTALLATION
C
18" 7/8" (22 mm)
24" 15/16" (23,5 mm)
B
30" 1" (24,5 mm)
36" 1" (25,5 mm)
Once the appliances have been adjusted and
properly levelled, loosen the two screws holding
the sealing plate in position.
Lower the plate until flush with the floor, and re-
tighten the screws. This will ensure optimized
airflow through the condenser necessary for proper
operation.
> Next join them at the front attaching the plastic
connecting brackets with the supplied screws [ 3 ] .
Attach the bracket on top of the units (if applicable)
as per figure [ 4 ].
3
20
Distance between units (A+B)
18" 24"
15/16" (23,5 mm)
1" (25 mm)
1" (26 mm)
1 1/16" (27 mm)
4
A
30" 36"
1" (24,5 mm) 1" (25,5 mm)
1" (26 mm) 1 1/16" (27 mm)
1 1/16" (27 mm) 1 1/8" (28 mm)
1 1/8" (28 mm) 1 1/8" (29 mm)