Temperature And Humidity - König Electronic KN-WS520 Mode D'emploi

Masquer les pouces

Table Des Matières

Table des Matières

Les langues disponibles

Part I

This weather station has 7 different language options: English German, French, Italian, Spanish, Dutch

and Danish.

The wather station have 6 different buttons: SET, ALARM, +, -/RCC, MAX/MIN and CH. These buttons

are sued for the following functions:

1. Set year, month, date, day and time

* Press SET button and hold for 3 seconds, When the beep sounds, the YEAR digit flashes, Use + or

-/RCC button on the front to set the YEAR.

* Press SET again twice, the MONTH digit flashes, use + or -/RCC to set the MONTH.

* Press SET button again, the DATE digit flashes, use + or -/RCC to set to set the DATE.

* Press SET button again twice , HOUR digit flashes, use + or -/RCC to set the HOUR

* Press SET button again, MINUTE digit flashes, use + or -/RCC to set the MINUTE

* Press SET again twice to resume normal display mode

2. Set ALARM

There are two alarm times you can set: ALARM 1 and ALARM 2

* Press ALARM button in the front to display the first alarm time and press again to display the

second alarm time

* to set the first alarm time, press ALARM time once , first alarm time display, hold the button for 3

seconds, alarm HOUR digit flashes, use + or -/RCC to set the alarm hour

* Press ALARM button again , alarm MINUTE digit flashes, use + or -/RCC to set the alarm minute

* after setting the first alarm time, use the same way to continue setting the second alarm time if

needed

3. Activate / Deactivate the Alarm Function

In normal display mode press "+" button on the front to activate or deactivate the alarm function. The

alarm bell sign will appear or disappear accordingly.

4. Use Snooze

When the alarm activates, press SNOOZE to stop the alarm sound, the alarm will sound again after

5 minutes.

5. Press CH button to select between channel 1, 2, and 3 when receiving signals from the transmitter.

Please note that the selected channel must comply with the channel set for the transmitter, e.g. if

the transmitter is set to channel 1, then the station needs to be set to channel 1 as well.

6. MAX/MIN Button

* Press this button to display the maximum temperature and humidity of both indoors and outdoors.

* Press again to display the minimum temperature and humidity of both indoors and outdoors.

7. MOON PHASE

It will calculate the moon phase automatically, the moon phase being divided into 8 degrees.