Technical Data; Assembly - Haussmann S1B-JM-112 Guide De L'utilisateur

APPLICATION
Check the box contents
Carefully remove the power tool from its packaging and check if the following
parts are complete:
-- 1/4 sheet sander
-- Dust box
-- Sandpaper
-- Punch plate
If any parts are missing or damaged, please contact Customer Service at
1-866-206-0888.
Parts list
The numbering of the product parts refers to the illustration of the power tool on
page 1 (fig. A).
1. Palm grip
2. On/off switch
3. Sander pad
4. Dust collection bag
5. Sandpaper clamp lever

TECHNICAL DATA

Code
Model number
Voltage rating
Current rating
No-load speed
Pad size

ASSEMBLY

WARNING!
Always ensure that the tool is switched off and the plug is removed from
the power source before making any adjustments or performing maintenance
procedures.
Selecting the right grade of sandpaper
f sandpaper can be purchased from your local
store.
to sand down rough finishes, medium grit to smooth the
work and fine grit to finish off.
optimum grades of sandpaper for a particular job. If there are still marks on
your work after sanding, try either going back to a coarser grade and sanding
the marks out before recommencing with the original choice of grit, or try
using a new piece of sandpaper to eliminate the unwanted marks before
going on to a finer grit and finishing the job.
59595066
S1B-JM-112
120 V AC / 60 Hz
1.5 amp
13,000 OPM
4-1/4" x 4-1/2" (108 x 115 mm)
!
17