Carrier KJR-120C/TF-E Manuel D'utilisation page 11

3. INSTALLATION METHOD
6. Wiring
Top side
wire outlet
Left side
wire outlet
Bottom side
wire outlet
B.Shielded wiring
Embedded switch
box wiring
Wiring
hole
Fig 3-9
Avoid the water enter into the wired remote controller, use trap and putty to seal the
connectors of wires during wiring installation. (Fig.3-10)
When under installation, reserve certain length of the connecting wire for convenient
to take down the wired remote controller while during maintenance.
A. For exposed mounting, four outletting positions.
There are three need cutting.
Right side
wire outlet
Cutting place of top
side wire outlet
Fig 3-8
Wiring through the wall
Wall hole and wiring hole
Diameter of wall hole：Φ20mm
8
Cutting place of right
Cutting place of left
side wire outlet
side wire outlet
Putty
Trap
Fig 3-10
CAUTION
G B
Putty
Putty
Trap
Trap