Publicité
Les langues disponibles
Les langues disponibles
- Authentification : default parameter in France is CHAP . But leave it on Auto
- MTU : Default 1492
Note that providers such as Tele2, AOL, Cegetel, ... imply having a
MTU set on «1400», or lse, you will have connecting troubles.
- On Demand : do not check. If checked, the modem/router will connect on
demand
- Enforce MTU : check because it will change the MTU to access all internet
sites
- Default Gateway : up to 16 possible connections, you will have to point
which one to use. So, you have to check
- Debug : activates debugging mode of the PPP conection
-VPI : set it on «8»
- VCI : set it on «35»
- QoS : configure as UBR since the good working of the flow is not
guaranteed with public internet subscription. If you have a professional
subscription, you can configure as CBR and modify the parapeters you'll have
access to.
7) click on the Apply button to validate the parameters. Click on Save &
Reboot in the left menu and once again on Save & Reboot to save the
parameters and restart the modem/router
Configuration of the wireless network (only with Evo-WRADSL2):
1) In the upper menu, click on Wireless to get the page to configure your
wireless network
2) In Setup, you have the SSID parameters, Hidden SSID (to hide network),
Channel and 108 Mbps Activation (4x). CLick on the Apply button to validate
your parameters
14
Publicité
