Table des Matières
Publicité
3
1
35
2
–9
–12
3
6.5
14
2
1
85
50
120
180
30
200
(
)
FREQUENCY
Hz
0
+ 6
–6
+ 9
+ 12
LEVEL
(
dB
)
2.5
1.1
10
1
Q-FACTOR
Basic Operation
Adjusting Parametric-EQ
Push knob to release the lock and rotate to
change the parametric's center frequency.
Notes:
•
Permits the adjustment of the center
frequency, continuously, between 30 to 200
Hz.
•
The knob must be released to activate the
adjust mode.
Push knob to release the lock and rotate to
change the parametric's level at the selected
center frequency.
Notes:
•
Permits the level adjustment, at the center
frequency selected, within a ±12 dB range.
•
The knob must be released to activate the
adjust mode.
Push knob to release the lock and rotate to
change the parametric's Q-factor at the
selected center frequency.
Notes:
•
Allows continuously variable change of
bandwidth (Q-factor) at the selected center
frequency. The Q-factor is varied from Q=10
(narrow bandwidth, steep slope) to Q=1
(wide bandwidth, gentle slope).
•
The knob must be released to activate the
adjust mode.
English
Publicité
Table des Matières
