Alpine ERE-G190 Mode D'emploi page 12

1
1
1
–9
–12
12
85
50 120
35
180
30 200
1
0
–6 + 6
+ 9
+ 12
Basic Operation
Adjusting Crossover Fre-
quency (Low-Pass Cross-
over and High-Pass Cross-
over)
Push knob to release the lock and rotate to
change the crossover's Low-pass or High-pass
cut-off frequency.
Notes:
• Permits the adjustment of the crossover
frequency, continuously, between 30 to 200
Hz.
• The knob must be released to activate the
adjust mode.
• The L.P.F. applies to the Subwoofer Output
only.
• The H.P.F. applies to the Front/Rear
Outputs only.
Adjusting Graphic-EQ
Push knob to release the lock and rotate to
change the level at the designated center
frequency (500 Hz, 2 kHz or 8 kHz).
Notes:
• Permits the level increase/decrease
adjustment of the center frequency selected
within the range of ±12 dB.
• The adjustment can not be made unless
lock of the knob is released.
English