Functional Description - Milwaukee 3100 Manuel De L'utilisateur

Masquer les pouces

Table Des Matières

Table des Matières

Les langues disponibles

to another. Shorting the battery terminals together

may cause burns or a fire.

• Under abusive conditions, liquid may be ejected

from the battery; avoid contact. If contact ac-

cidentally occurs, flush with water. If liquid

contacts eyes, additionally seek medical help.

Liquid ejected from the battery may cause irritation

or burns.

• Do not use a battery pack or tool that is dam-

aged or modified. Damaged or modified batteries

may exhibit unpredictable behavior resulting in fire,

explosion or risk of injury.

• Do not expose a battery pack or tool to fire or

excessive temperature. Exposure to fire or tem-

perature above 265°F (130°C) may cause explosion.

• Follow all charging instructions and do not charge

the battery pack or tool outside the temperature

range specified in the instructions. Charging

improperly or at temperatures outside the specified

range may damage the battery and increase the risk

of fire.

SERVICE

• Have your power tool serviced by a qualified

repair person using only identical replacement

parts. This will ensure that the safety of the power

tool is maintained.

• Never service damaged battery packs. Service

of battery packs should only be performed by the

manufacturer or authorized service providers.

SPECIFIC SAFETY RULES FOR

CUT-OFF MACHINE CART

• To reduce the risk of injury, always wear eye

protection. Use appropriate hearing and respira-

tory protection.

• Properly assemble the cart before mounting the

tool. Proper assembly is important to prevent risk

of collapse.

• Securely fasten the tool to the cart before use.

Tool shifting on the cart can cause loss of control.

• Place the cart on a solid, flat and level surface.

When the cart can shift or rock, the tool cannot be

steadily and safely controlled.

• Use only with MX FUEL

Improperly installed tools can cause injury or property

damage.

• Remove battery from tool before connecting to

cart, storing, or transporting.

• Remove battery from battery storage location

before use.

• Check alignment and tighten all connections

before each use.

• Clear debris from the path of the cart. If the cart

is pushed over objects, the abrasive wheel may bind

in the cut and shatter.

• Always use the cart to cut in a straight line.

Veering may cause flexing of the abrasive wheel

and shatter the wheel.

• Follow all instructions and warnings provided

with the cut-off machine.

•Maintain control. Keep proper footing and balance

at all times.

•Maintain cart carefully. Keep cart dry, clean and

free from oil and grease. Follow instructions for

changing accessories. Periodically inspect cart for

damage and wear.

• Always use common sense and be cautious when

using tools. It is not possible to anticipate every

situation that could result in a dangerous outcome.

Cut-Off Machines.

Do not use this tool if you do not understand these

operating instructions or you feel the work is beyond

your capability; contact Milwaukee Tool or a trained

professional for additional information or training.

• Maintain labels and nameplates. These carry

important information. If unreadable or missing,

contact a MILWAUKEE service facility for a free

replacement.

•

Some dust created by power sanding,

WARNING

sawing, grinding, drilling, and other

construction activities contains chemicals known to

cause cancer, birth defects or other reproductive

harm. Some examples of these chemicals are:

• lead from lead-based paint

• crystalline silica from bricks and cement and other

masonry products, and

• arsenic and chromium from chemically-treated

lumber.

Your risk from these exposures varies, depending on

how often you do this type of work. To reduce your

exposure to these chemicals: work in a well ventilated

area, and work with approved safety equipment, such

as those dust masks that are specially designed to

filter out microscopic particles.