Preparing The Machine - Spellbinders PLATINUM 6 Mode D'emploi

Preparing the Machine

1. Pull down tray on both sides of Platinum 6
through the Platinum 6. See fi g. 3.
2. The rubberized bottom will aide in the stability of machine. *Keep the bottom of machine clean for
best performance.
3. When fi nished with use, return tray sides to fold up position for compact storage. See fi g. 4.
Prepare for Creativity
Whether you're cutting, embossing or both, you will need the right tools for the job.
1. Spellbinders Die Templates (sold separately) - Nestabilities
®
stencil for unlimited creative possibilities. The Spellbinders Die Templates come in all shapes and sizes inspiring
creativity with beautiful details. Note: Spellbinders Dies will cut through a variety of diff erent media from
cardstock, papers and foils to light-weight materials such as thin chipboard, fabrics and thin leather.
2. Spellbinders 3D and 2-sided Em-bossing Fold'ers
your project extra special.
3. Spellbinders Steel Rule (sold separately) allow you to cut multiple layers of a wide range of materials such as
chipboard, wool felt, fabrics and thin metals.
Building a Sandwich
ALL Sandwiches should be stacked in the correct order. Attempting to use incorrect plates may cause damage to
the machine. Please ensure the combinations of plates are correct. To ensure the best results, experiment with a
scrap piece of paper fi rst.
Machine to feed your Cutting and Embossing Sandwiches
™
and Shapeabilities
®
(sold separately) allow you to emboss detail that can make
�
allow you to cut, emboss and
®
ENGLISH
fi g. 3
fi g. 4
2