Wireless Connection (Router With Wps Button); Operation; Live-Viewing The Camera; Recording Video To The Micro Sd Card - Honeywell FRIEDLAND FGGA05 Série Manuel D'installation Et D'utilisation

6.2

Wireless connection (router with WPS button)

7

Operation

7.1

Live-viewing the camera

7.2

Recording video to the Micro SD card

7.2.1

Manually recording video

1. Click "REC" to start recording for approximately 30 seconds.
2. Click "REC" again 1x to stop recording.
7.2.2

Recording video with security detectors

If a door/window contact detector or a PIR movement detector is triggered while your alarm system is armed, the IP gateway
will locate the corresponding IP camera in the same location and inform it to start recording for approximately 30 seconds.
Note:

If the camera location is set to "None", it will record whenever any detector is triggered.

All cameras will record when the control panel detects event conditions of "Panic", "Tamper", "Fire" and "Duress"
regardless of the location the camera is set to.
1. Disconnect the Ethernet cable from the camera to start
the wireless connection.
2. Press and release the WPS button on the router. Within
one minute, press and release the WPS button on the
camera. The indicators on the camera come on and go
off alternately. Within one minute, the indicators on the
camera will go off.
If the wireless connection has been established, the
Ethernet connection indicator will come on.
1. Log in to the website
https://GlobalGuard.Friedland.co.uk on your PC.
2. Click "Camera View".
3. Select the camera.
4. Click "View".
Note:
The Apple/Android GlobalGuard apps can be used to view
cameras connected to your system. Download and install the
app from the App Store (Apple) or from Google Play
(Android). Use your login details for your GlobalGuard online
account to sign in.
9