Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
5.4
Viewing video from the camera
1.
Log in to the website
https://GlobalGuard.Friedland.co.uk on your PC.
a)
Enter your account information:
"Home ID", "Admin/User ID", "Password".
b)
Enter the 4-digit code.
c)
Click "Login".
2.
Add the new camera:
a)
Click "Settings".
b)
Click "IP CAM Settings".
c)
Click "Add IPCAM" to add a new camera.
d)
Enter the MAC address of the camera.
(The MAC address is printed on the camera.)
Note:
Follow the on-screen instructions for registering the camera
to operate with your system correctly.
3. Assign advanced settings to the camera:
-
"Camera Info": camera number(automatically
assigned to the camera)
-
"Assign Location": camera location
-
"Assign Camera Name": camera name
-
"Enable Wifi Function": to switch the Wi-Fi
function on/off.
-
"Audio": to switch the audio on/off.
The indicator on the IP gateway comes on to indicate that the
new camera has been added to your system:
Note:
The 4 indicators s the connection status of up to 8 cameras:
-
If you connect camera 1-4, indicators 1-4 will become
green.
-
If you add camera 5, indicator 1 will become orange
(etc.).
-
If you disconnect camera 1 but camera 5 is still active,
indicator 1 will become red (etc.).
4.
Click "Camera View".
5.
Select the camera.
6.
Click "View".
7
Publicité
Chapitres
Table des Matières
Dépannage
