Installation; Assembling The Camera; Installing The Camera - Honeywell FRIEDLAND FGGA05 Série Manuel D'installation Et D'utilisation

5

Installation

5.1

Assembling the camera

5.2

Installing the camera

The camera has a built-in infrared LED to allow you to view at night for 24-hour surveillance. The LED will automatically activate
at night and the picture viewed will turn to black and white. The night vision range is up to 10 metres. If necessary, use a lamp
to improve night vision.
Position the camera in view of a door/window contact detector or a PIR movement detector. The camera can record video
after a security detector has been triggered by an intruder provided the camera has been setup with same location setting as
the security detector.
The camera has an open-field radio-frequency operating range of up to 100 metres. The amount by which the wireless range
will reduce depends on the obstruction between the camera and the wireless router. The effect on the range of multiple walls
is cumulative.
Wall type
Dry-lined partition wall
Single-layer brick wall
Double-layer brick wall
Metal panel/radiator
1. Assemble the camera stand.
2. Tighten the camera (1) onto the camera stand. Set the
camera to the correct angle. Tighten the knob (2).
3. Loosen the thumbscrew (3).
4. Set the camera (1) to the correct position.
5. Tighten the thumbscrew (3).
Range reduction
10-30%
20-40%
30-70%
90-100%
5