Configuring The Vssp 2.0 - Varta VSSP 2.0 Mode D'emploi

Prerequisites
NOTE
Setting the
language, country,
date and time
CONFIGURING THE VSSP 2.0
The following prerequisites must be ensured so that you
can confi gure the VSSP 2.0:
An Internet connection with WLAN router must be
available and a WiFi connection must be established to
VSSP server.
The provided user ID and the password are on hand.
When switching on for the fi rst time, several
fundamental settings must be made:
Select the language and country of use
Set the country-specifi c keyboard layout
Enter the current date and time
Set up the network and WiFi confi guration
The program guides you through the confi guration step-
by-step.
You can also change the confi guration later. To do this, in
the module overview, select Confi guration (see Module
overview on page 23).
Switch on the VSSP 2.0.
The VSSP 2.0 starts and establishes the WiFi
connection to the VSSP server. This can take a few
seconds.
The Local parameters screen is displayed.
Commissioning
VSSP 2.0 17
DE
EN
FR
ES
IT