NTN-SNR AXC Série Mode D'emploi page 24

Recommended relubrication quantities [cm
Linear axes with ball screw drive: lubricating point S
Axis
S_ _5
AXC40 0.35
AXC60 0.65
AXC80 1.1
AXC100 1.6
AXC120 2.2
Linear axes with ball screw drive: lubrication point F
Axis B/C
AXC40 0.3
AXC60 1
AXC80 2
AXC100 3
AXC120 4
Linear axes with toothed belt drive generally only have one lubrication point for linear guide lubrication.
Quantities listed in the tables are based on the relubrication amount per lubricating point.
AXC series linear axes feature lubricating nipples on both sides to achieve the highest possible level of
accessibility. This means that the quantities listed above may only be applied into the respective lubricating
nipple on one side of the axis per lubrication interval.
] – AXC series
3
S_ _10 S_ _16
0.35
0.9 1.0
1.9
3.1
22
Incline
S_ _20 S_ _25
2.5
3.5
3.6
Fig. 14
S_ _32 S_ _50
4.6
5.5