Adjusting The Temperature Zone Divider; Changing The Light Fitting - V-ZUG WINECOOLER SL 628 Mode D'emploi

Adjusting the temperature zone divider

The temperature zone divider can be raised or lowered by 1 position.
Pull forwards away from the rear wall, and lift on door side.
Reverse this procedure to replace at a different level.
Please ensure that the rear section of the temperature zone divider slots into the
groove provided in the rear wall.

Changing the light fitting

Note: Please use only original light fittings provided by the manufacturer.
Click off the light cover. Loosen the plug of the light fitting. Reverse this procedure
to insert a new light fitting.
53