Using The Carrying Strap; Fuse Exchange - Rocktrail Rabb 12 A1 Mode D'emploi

Using the carrying strap

GB

Fuse exchange

52
For simplifi ed transportation of the appliance you can attach the supplied carrying
strap to it..
♦ For this, unwind the carrying strap
♦ Then, thread the free end of the carrying strap
opposite end of the carrying strap, such that the carrying strap
and can support the possibly loaded appliance (see illustration).
The car plug contains a fuse. If the appliance does not function, it could be that
the fuse is defect. In such a case, replace it with the supplied spare fuse
♦ Remove the car plug from the cigar lighter.
♦ Open the car plug by turning the fl uted screw insert (C) gently anticlockwise,
if need be with pliers, and remove it.
♦ Now, take the plug tip (B) from the fuse (A), remove the fuse (A) and place
it to one side.
♦ Now place the new fuse
slightly protruding end of the fuse and turn the previously removed screw
insert (C) back on.
NOTICE
► If the appliance still does not function, or the fuse blows again straight
afterwards, there is a defect. Then make contact with the Service Hotline
(see chapter Service).
Handling .../Fuse exchange
and pass it through the eyelets
into the car plug, place the plug tip (B) onto the
.
through the loop on the
is secure
.
RABB 12 A1