AEG KH 4232 BT Mode D'emploi page 54

English
54
If the registration was successful, you will hear a short beep and the message
"PHONE ONE CONNECTED" via the earphones. Then the control lamp flashes
blue slowly. If possible, adjust the volume of the player to a suitable listening volume.
NOTE:
• If the Bluetooth version of your playback device is under V 2.1, you have to
enter the password "0000" to connect the devices.
• Depending on the device manufacturer, you need to perform the registration
(Pairing) again to connect the devices.
• The Bluetooth compatibility cannot be ensured for devices (e.g. mobile
phones) getting released in the future.
• To be able to transfer audio data, Bluetooth needs to stay activated in your
player.
• If the Bluetooth connection is disconnected, the message "DISABLED" can be
heard.
Use
Important! Charge the battery before first use. See details in chapter "Charge
Integrated Battery".
The earphones come with 3 pairs of earplugs: small, medium and large.
1. Put on the plug in the appropriate size.
2. Insert the earplugs into the ears. (See the illustrations on page 3 "How to Wear
the Earphones")
WARNING: Do not insert the earplug too deep into the ear.
3. If the earphones do not fit optimally around your ears, you can adjust the holder
by slightly bending it.
Description of the Control Buttons
The device is equipped with multi functional buttons. For different functions press
the respective button briefly or press and hold.
NOTE:
• Not all the functions may be supported depending on the playback device.
• Depending on the device, you must start the music app on your playback
device beforehand.
KH4232BT_IM 12.04.17