Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
6
7
8
9
, Note: Use the beard trimmer without the adjustable comb for trimming hair
close to the skin. This will trim hair to 1mm, holding the blades
perpendicular to the skin will trim hair to 0.4mm.
, ATTACHING AND REMOVING THE ADJUSTABLE COMB
•
Ensure the trimmer is switched off.
•
To attach the comb place the comb on the beard trimmer so that the teeth
of the comb sit on top of the teeth of the blades.
•
Slide on the comb until it sits securely on the beard trimmer.
•
To remove the adjustable comb, ensure the trimmer is switched off.
•
Push the back of the comb upwards and lift away from the beard trimmer.
, Note: the on/off switch controls the adjustable comb lock switch to ensure
consistent grooming results. When the trimmer is turned on the comb lock
switch is enabled. When the trimmer is turned off the comb lock switch is
disabled. This is when the comb length is able to be adjusted.
, TO THIN AND TAPER THE BEARD/MOUSTACHE
•
Attach the adjustable comb to the trimmer blade and select the desired
length by sliding the adjustable comb up or down.
•
The setting will appear on the length position indicator on the comb. If you
are trimming for the first time, start with the maximum trimming length
setting.
•
Once you have your desired adjustable comb length turn the trimmer on,
this will secure the length increment on the comb.
•
Place the flat top of the trimmer comb against the skin.
•
Use motions towards the edge of the beard/moustache line to trim to
desired locations in facial area and away from the beard in the neck area.
, TRIMMING EDGE OF SIDEBURNS
•
Start with edge of sideburn and with the trimmer blades resting lightly
against your skin, use motions towards the edge of the sideburn line to trim
to the desired locations in the facial area.
11mm
13mm
15mm
18mm
5
Publicité
Table des Matières
