Pfannenberg DTT 6 01 Série Notice D'utilisation Et De Montage page 8

Contents
1 Hints on the manual ......................................................... 8
2 Handling ............................................................................ 8
2.1 Transport .............................................................................. 8
2.2 Storage ................................................................................. 8
2.3 Unpacking ............................................................................ 8
3 Scope of delivery and options ........................................ 9
3.1 Scope of delivery ................................................................. 9
3.2 Accessories .......................................................................... 9
4 General Information ......................................................... 9
5 ID Plate and Technical Data ............................................ 9
6 Safety ................................................................................ 9
7 Function ............................................................................ 9
7.1 Principles of function ...................................................... 9
7.2 Condensate ....................................................................... 9
8 Installation ...................................................................... 10
8.1 General .............................................................................. 10
8.2 Power connection .............................................................. 10
8.3 Service interface ................................................................ 11
9 Operating Conditions .................................................... 11
10 Putting into operation and function ............................. 11
11 Cleaning and Maintenance ............................................ 11
11.1 Cleaning ............................................................................. 11
11.2 Maintenance ...................................................................... 11
12 Stopping .......................................................................... 11
13 What to do if ... ............................................................... 12
14 Warranty Conditions ...................................................... 12
Read this manual completely and carefully before
installing the unit.
This manual is an integral part of the scope of
delivery and must be kept until the unit is dis-
posed of.
085408158
1 Hints on the manual
This handbook contains instructions for the installation and opera-
tion of roof attachment cooling units, series DTT 6x41.
Hint
The technical specifications for each machine along with additional
information on assembly, connections and operation are contained
in the accompanying supplement sheet or on our homepage
(www.pfannenberg.com).
In this manual, safety recommendations and other information are
structured as follows:
Hazard!
If the measures described in the following are not strictly
observed there is danger to life and health.
Hazard!
If the measures described in the following are not strictly
observed there is danger to life and health due to electrical
shock.
CAUTION!
If the measures described in the following are not strictly
observed material damage may be caused.
Hint
A hint contains additional information on the action or instruction
described.
2 Handling
2.1 Transport
• Do not subject the cooling unit to temperatures below -40°C or
above +70°C during transportation.
• Do not subject the cooling unit to relative humidity of over
90%during transportation.
• Lift cooling unit only by the casing or with four jack rings (M8)
• Transport the cooling unit only in condition of usage.
Failure to observe these instructions will render the warranty pro-
visions null and void.
2.2 Storage
• Never expose cooling units to temperatures exceeding +70 °C
during storage.
• Store cooling unit only in condition of usage.
Failure to observe these instructions will render the warranty provi-
sions null and void.
2.3 Unpacking
• Prior to and during unpacking make a visual inspection of the
cooling unit to see whether any damage has occurred during
transport. Especially pay attention to loose parts, dents, scratch-
es, visible loss of oil etc.
• Any damage must be reported immediately to the forwarding
agent (follow the instructions in "Rules for Damage Claims").
Moreover, the latest edition of the "General Conditions for Sup-
plies and Services" issued by the ZVEI (Central Association for
the German Electrotechnical Industry") shall apply.
• Before disposing of packing material ensure that it does not con-
tain any loose components.
Danger!
Burr caused by production may be present on the metal
edges of the unit. Always wear protective gloves when
carrying out maintenance work and installation.
In case of a warranty claim exact details on the fault (photograph, if
possible) and the indication of type and serial number of the cooling
unit are required.
8/40
GB