Led Display; Before The First Use - HAEGER Multi Coffee Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

English

LED display

Power ON
Steam function
Drip coffee

Before the First Use

It is recommended to rinse the coffee maker before the first use. The coffee
maker should also be rinsed after a longer period without use. Refer to the
instruction in the "Cleaning and maintenance" chapter.
Use the appliance as if it were about to make an espresso coffee but
without any coffee, to flush through all of the internal parts of the coffee
maker.
There may be noise and no water come out when pump the water at the
first time, it is normal, you should turn the steam regulator to the opening
position to release the air in the appliance. After about 20s, the noise will
disappear, and the water will come out.
You cannot brew espresso if you have not flushed the machine at first; the
flushing cycle causes the boiler to fill with water. If you have not used the
machine for a few days, you must flush it with fresh water before you use it
again.
4
Preheating
Manual operation
One or two cups
Hot water
Instructions for use

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Cm-145.008a

Table des Matières