Automatic Shutdown - Glow Fire Ares Guide D'utilisation

Make sure that children have no opportunity to play with the device. If the power cord of this
device is damaged, it must be replaced by the manufacturer or its customer service department
or a similarly qualified person in order to avoid hazards.
This device is intended for use in the home or for similar applications, primarily the electric
fireplace is used for decorative purposes.
The fireplace is not suitable for installation in vehicles and machines.
To avoid danger due to unintentional resetting of the thermal shutdown, the chimney must not
be operated via an external switching device, such as a timer, or connected to a circuit that is
switched on and off regularly.
BUTTON

AUTOMATIC SHUTDOWN

In the event of overheating, the device switches off automatically. In this case the mains plug of
the electric fireplace must be pulled out of the mains socket. The electric fireplace must cool down
for about 20 minutes before being used again. The air inlets and outlets must be kept free of dust,
lint, etc.
MAINTENANCE
Before carrying out maintenance work, the mains plug of the device must be pulled out of the
mains socket!
3
ON (I). Activates all functions.
OFF (O). Disables all functions on the control panel and remote control.
ON: Activates the functions of the touch control panel and the remote control. Turns on the flame.
OFF: Disables the functions of the touch control panel and the remote control. Turns off the flame.
TIMER: Controls the timer settings and switches the fireplace off at the set time. The settings range
from 0.5 hours to 7.5 hours.
FLAME "- ": Darkens the flame.
NOTE: The flame goes out when the main switch is turned off. The heating can only be activated when
the flame is switched on.
FLAME "+": Makes the flame shine brighter.
NOTE: The flame goes out when the main switch is turned off. The heating can only be activated when
the flame is switched on.
HEATER: Switches the heating on and off.
NOTE: The heating can only be activated when the flame is switched on. The heating does not switch
on when the flame is switched off.
NOTE: To protect against overheating, the heater blows cold air for 10 seconds before and after it is
switched on and off.
FUNCTION
Stand: 08/2020
Version: 1.1