Changing The Illumination Lamp; Adjusting The Legs; Installation (Under The Counter) - Beko TSE 1400 F Manuel D'utilisation

Adjusting the legs

If your refrigerator is unbalanced;
You can balance your refrigerator
by turning its front legs as illustrated
in the figure. The corner where the
leg exists is lowered when you turn
in the direction of black arrow and
raised when you turn in the opposite
direction. Taking help from someone
to slightly lift the refrigerator will
facilitate this process.
Changing the illumination
lamp
To change the Bulb/LED used for
illumination of your refrigerator, call
your AuthorisedService.
The lamp(s) used in this appliance
is not suitable for household room
illumination. The intended purpose of
this lamp is to assist the user to place
foodstuffs in the refrigerator/freezer
in a safe and comfortable way.
The lamps used in this appliance
have to withstand extreme physical
conditions such as temperatures
below -20 °C.
(only chest and upright freezer)
Installation (Under the
counter)
• Internal height of the counter should
be 820mm.
• (!) Cookers or other heat sources
must not be placed above the
counter where the appliance is
installed under the counter.
• The mains wall socket plug must be
close to the right or left hand side of
the appliance.
• Remove the top cover of the
appliance. There are 4 screws(2
pieces at the back, 2 pieces below
the front edge) that should be
removed. Fig. 1
• Cut the part shown in the picture
and then remove it by the help of
pliers.
• Place you appliance under the
counter and adjust the front feets
until its top touches to the counter.
• In order to use the product under
the counter, the distance between
the wall and the reference indicated
in the top connection plastic must
be minimum 595 mm.
Fig. 2-3
• Fix the appliance under the counter
by using 2 of the screws that
was removed from the top cover.
(Material of the counter must be
plastics or wood based!)
Fig. 4
14
EN