Listen From An Auxiliary Device - Nyne Home Audio Série Manuel Utilisateur

Listen from an auxiliary device

You can listen to music from an auxiliary
device through either the 3.5mm audio
input socket (
the dock or the
sockets on the back panel of the Bluetooth
docking speaker.
To use the 3.5mm audio input socket:
Note:
•
Make sure that the auxiliary device
has a 3.5mm headphone socket.
1
Connect the supplied 3.5mm
audio cable.
•
one end to the 3.5mm audio input
socket (
of the dock
•
the other end to the 3.5mm
headphone socket on an auxiliary
device
☞
The indicator on the top panel
lights up.
☞
The device switches to 3.5mm
audio input (AUX) mode
automatically.
2
Start music play on the auxiliary
device.
NYNE NH-5000_User Manual_A5.indb 17 NYNE NH-5000_User Manual_A5.indb 17
) on the right side of
(white/red)
) on the right side
To use the (white/red) sockets:
1
Connect audio cables (white/red;
not supplied).
•
one end to the
(white/red) sockets on the back of
the device
•
the other end to the audio out
(white/red) sockets on an auxiliary
device
2
Press on the remote control
(or tap on the top panel
repeatedly) to select the RCA
audio input source.
☞
The indicator on the top panel
lights up.
3
Start music play on the auxiliary
device.
EN 17
5/24/2012 10:17:02 AM 5/24/2012 10:17:02 AM